Optimized Title: ECCPP 1.25 Wheel Spacers for Riviera, Blazer, Firebird, XLR

The ECCPP Wheel Spacers/Adapters brand is designed to meet original equipment (OE) specifications in form. Please note that all references to brand names and models are for compatibility purposes only and do not imply any affiliation or endorsement by the original manufacturer.

The ECCPP wheel spacers kit includes the following features:

🚘【5 lug wheel spacers】Thickenss:1.25" or 32mm;Inner Diameter:70.5mm;Vehicle Bolt Patter:5x4.75 or 5x120.65mm;Wheel Bolt Pattern:5x5.4.75 or 5x120.65mm;Thread Pinch:12x1.5

🚘【Super Durable】The body of wheel adapters is made of Forged aluminum.Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength

🚘【Bennefit】5x120.65mm wheel spacers Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly,greatly improve the vehicle stability

🚘【1.25 inch wheel spacers 5 lug About the thickness】 Please confirm about the Fender Gap (shown in the left picture),this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing,the thickness of wheel adapters should be less than the fender gap

🚘【5x4.75 wheel spacers Essential VERIFY FITMENT】 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.5mm

PLEASE NOTE THAT ALL REFERENCES TO BRAND NAMES AND MODELS ARE FOR COMPATIBILITY PURPOSES ONLY AND DO NOT IMPLY ANY AFFILIATION OR ENDORSEMENT BY THE ORIGINAL MANUFACTURER.

This spacer adapter includes open end lug nuts to secure the spacers onto your factory hubs. If your factory thread size is different, you will need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation. Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs, 2) The wheels need to have the open slots (cavities) between mounting holes, and 3) Purchase a set of shorter studs and replace them with the factory studs.

NON-INFRINGEMENT DISCLAIMER FOR AUTO PARTS SALES.

product information: